Our Main Service
During production Inspection (DPI)
Container Loading Supervision(CLS)
Factory Audit (FA)
Simple Factory Audit (SFA)
Social Compliance Audit (SA/Sedex)
How to check the furniture
Check if the inspected samples and packaging included cartons with any strong or offensive odors
Each product should work normally as per claimed.
Product should get assembled correctly and easily according to IM, and should be stable/functional after building.
Adhesive Test on Printing or Silk-screen
Use 3M tape for testing; Logos and other marking should not peel off.
(1)Use 3M adhesive tape to paste on printing surface, let the tape paste more firm by pressing. (2)Tear tape fastly along the 45 degrees. The logo or printings should not be peeled off after test.
Adhesive Test on Coating on Metal substrates
Cut parallel and perpendicular lines through the dry coating with a cutter at the 1.0 mm spacing for 100 squares(at 6 six cuts)
Use 3M tape for testing the coating should not peeled off.
Wobbly Base Check
No wobbly or rocky base when place the unit on even interface
Abuse / Fatigue Test
The product should keep same after the functional parts are operated 20times at least
For chair and single bed: Load the weight 150kg;
For table: load 50kg at least for the table;
For double chair and bed: Load the weight 300 kg;
For the shelf of garderobe: load 25kgs at least;
For the drawers of cabinet, load 20 kgs at least
If client has special request, pleas follow the request in priority.
Loading for 1 hours; after test, the product should be remained same as before
The moisture content for solid wood should be in 8%~12%
Stability Test (only for chair)
No turn over, when standing the chair with loading on the 10 degree tilting interface.