Sofa Inspection Services

Sofa Inspection Services

Our Main Service Pre-shipment Inspection(PSI) During production Inspection (DPI) Container Loading Supervision(CLS) Factory Audit (FA) Simple Factory Audit (SFA) Social Compliance Audit (SA/Sedex) Laboratory Testing Product Certification Sample Check How to check the sofa Perform a function test...

Chat Now

Product Details

图片6.jpg

Our Main Service

 

Pre-shipment Inspection(PSI)
blob.png

During production Inspection (DPI)blob.png

Container Loading Supervision(CLS)blob.png

Factory Audit (FA)blob.png

Simple Factory Audit (SFA)blob.png

Social Compliance Audit (SA/Sedex)        

blob.png

Laboratory Testingblob.png

Product Certificationblob.png

Sample Checkblob.png

TIM图片20180518142235.jpg

How to check the sofa

Perform a function test according to the purpose.disclaim on the package

Assemble test ,S2 It should be follow manual instruction

Perform a static loading test.400 lbs on every seat of the item at the same time for 1 hour. Place the weights at least 10cm away from the edges of the seat There should be no visible deformity. Or as per client Labeled

claimed weight

Each product should work normally as per claimed.

Perform moisture content test .(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.)

Fatigue test for all the adjustable parts

Check the seam strength of each connection, especially on the seat, backrest, armrest and

Check the item for any strong or offensive odors

Check the density of the foam. check if the foam is recycle foam and thickness as client request

Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.

Product should get assembled correctly and easily according to IM, and should be stable/functional after building

(1)Use 3M adhesive tape to paste on printing surface, let the tape paste more firm by pressing. (2)Tear tape fastly along the 45 degrees. The logo or printings should not peel off after test.

Cut parallel and perpendicular lines through the dry coating with a cutter at the 1.0 mm spacing for 100 squares(at 6 six cuts)

Use 3M tape for testing the coating should not peeled off




Previous:Table Inspection Services Next:Jacket Inspection Services

Inquiry