Cap Inspection Services

Cap Inspection Services

Our Main Service Pre-shipment Inspection(PSI) During production Inspection (DPI) Container Loading Supervision(CLS) Factory Audit (FA) Simple Factory Audit (SFA) Social Compliance Audit (SA/Sedex) Laboratory Testing Product Certification Sample Check How to check the Cap Perform a Fitting check...

Chat Now

Product Details

图片6.jpg

Our Main Service


Pre-shipment Inspection(PSI)

blob.png

During production Inspection (DPI) 

blob.png

Container Loading Supervision(CLS)blob.png

Factory Audit (FA)

image007.png

Simple Factory Audit (SFA)blob.png

Social Compliance Audit (SA/Sedex) blob.png

Laboratory Testingblob.png

Product Certification blob.png

Sample Checkblob.png

TIM图片20180518142235.jpg

How to check the Cap

Perform a Fitting check using a model or doll. Then wear the cap a little bit tight and check if you can feel uncomfortable points especially around the peak

Function for zipper, Velcro belt, etc and well stitched--all inspected samples

Test the strength of the seams by hand. 

Reverse the peak and pull on it to check the seaming strength. 

Reverse the cap and check the inside workmanship

Check number of stitches pre inch.

Color shading check within the same piece:  

1. Put the same color parts side by side and indentify the different dye lot.

2. Color shading check among all of  the inspecterd pieces: place them side by side as per picture “color shading   check attached” and indentify the different dye lot.

If you don’t have a grey scale, please print the grey scale of emergency.

1.Color shading check within the same piece: put the same color parts side by side and indentify the different dye  lot.

2.Color shading check among all of  the inspecterd pieces: place them side by side as per picture “color shading  check attached” and indentify the different dye lot.

If you don’t have a grey scale, please print the grey scale of emergency.--all inspected samples

If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects.

*S*: Perform a needle detecting test without metal button or decoration.-All sample size should be pass through the convery belt tunnel type detection machine well. If factory no metal detection machine, should make important remark to remind client

Perform a Fatigue test for all adjustable parts found (i.e., zippers, velcro and snaps). 

Try to fold the peak smoothly-Do this 20 times.The peak should return to the initial position-20 pcs

Perform a hand Pulling test for button/snap, top button of the cap, back buckle and on the peak.-The button is well fixed to the cap

Previous:Watch Inspection Services Next:Electric Products Inspection Services

Inquiry