Our Main Service
During production Inspection (DPI)
Container Loading Supervision(CLS)
Factory Audit (FA)
Simple Factory Audit (SFA)
Social Compliance Audit (SA/Sedex)
How to check the timepieces
Adhesive Test on coating
Use 3M tape for testing; Logos and other marking should not peel off.
Rub Test only on rating label
Cloth soaked with water or/and alcohol, rub 15 seconds each; After the test, logos and other marking should not peel off.
Max setting, for 4hours continued running, no malfunction and safety issue after test.
Internal workmanship check
Verify the information for critical components -Take clear picture for markings of each component.