Our Main Service
During production Inspection (DPI)
Container Loading Supervision(CLS)
Factory Audit (FA)
Simple Factory Audit (SFA)
Social Compliance Audit (SA/Sedex)
How to check the Umbrella
Perform the function test.-II
1. Manual open: each section/panel must be well attached to ribs.
2. A tip should be attached to the end of each rib.
3. Check all other functions claimed on packaging or in the instruction manual.
Perform an abnormality test- on 3pcs
Check the strength of hte armature, perform the umbrella reverse?
Perform an abuse test- S1
For the rib, handle and metal shaft (the handle should be well attached)
Test the strength of the seams on the item and also count and record the number of stiches per inch/cm on the item.-S2
Perform a rainproof test -S1
If the item is supposed to be rainproof - windproof test if applicable (for reference only, this test can only be tested in LAB.)
Perform fatigue test for all adjustable parts
Open and close it 20 times.
Test the strength of the handle loop.-S1
Perform a color shading check -II
Take all of the inspected pieces place them side by side. take photos to show any difference in the color shade between identical pieces. attach the photos and identify which dye lot each piece was dyed in - if you find item from different dye lots, rate the difference in shade using the grey scale.